Disabling Automatic Network Shortcut Resolution
PSS ID Number: Q150215
Article last modified on 06-30-1999
4.00 95
WINDOWS
======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft Windows 95
- Microsoft Windows NT Server version 4.0
- Microsoft Windows NT Workstation version 4.0
-------------------------------------------------------------------------------
SYMPTOMS
========
When you create a shortcut to a resource on a mapped network drive, and then
remap the same drive to a different network resource, Windows attempts to
connect to the original network resource when you access the shortcut.
Furthermore, when you re-establish the original connection, a different drive
letter may be mapped to the original resource. This may cause programs to fail
because the expected drive mappings are not present.
CAUSE
=====
This behavior is part of the mechanism by which Windows attempts to resolve and
automatically maintain shortcuts to network resources.
For additional information about Windows shortcut resolution, please see the
following articles in the Microsoft Knowledge Base:
Q128932 How Windows 95 Resolves Shortcut Links
Q132658 Shortcut to Deleted NetWare File May Open Wrong File
RESOLUTION
==========
Individual shortcuts can be modified by using the Shortcut.exe tool to remove
Universal Naming Convention (UNC) path information from the shortcut.
Note that to successfully use the Shortcut.exe tool to remove UNC path
information from a shortcut, it must meet the following criteria:
- The shortcut must contain both UNC and static path information. You can
verify the shortcut contains the static path by right-clicking the shortcut,
clicking Properties, and then clicking the Shortcut tab. The path in the
Target box should be in the following format:
" :\folder\filename.ext " (without the quotation marks)
You can verify the shortcut contains the UNC path information by viewing the
shortcut in Notepad. To do so, click Start, click Run, and then type the
following line in the Open box
" notepad \ " (without the quotation marks)
where is the path to the shortcut you want to change, and
is the name of the shortcut from which you want to
remove the UNC path information.
You may need to click Word Wrap on the Edit menu to view the shortcut file.
The shortcut file contains primarily unreadable binary information, however
you should be able to read the UNC and mapped drive information. Do not
modify or save the shortcut file.
- The drive specified in the static path has been mapped to a network share
different than the original one referred to by the shortcut.
- The mapped drive must contain a directory path structure and a file whose
name matches that of the static path in the shortcut.
The Shortcut.exe tool can be obtained from the following locations:
Windows 95
----------
The Shortcut.exe tool is included in the Microsoft Windows 95 Resource Kit and is
also located in the Admin\Apptools\Envvars folder on the Windows 95 CD-ROM.
Windows NT
----------
The Shortcut.exe tool is included in the Microsoft Windows NT Server Resource Kit
Version 4.0, Supplement One, in the I386\Desktop folder, MIPS\Desktop folder,
and ALPHA\Desktop folder on the Windows NT Server Resource Kit CD-ROM.
For more information about how to resolve this issue in Windows NT, please see
the following article in the Microsoft Knowledge Base:
Q158682 Shortcuts Created Under NT 4.0 Resolve to UNC Paths
To remove the UNC information from a shortcut, follow these steps:
NOTE: If you want to disable only the automatic resolution, and you are not
concerned about deleting the UNC path information from the shortcut, you should
perform only steps 1 and 2. The shortcut must contain both a UNC path and a
static path.
1. Click Start, point to Programs, and then click Command Prompt or MS-DOS
Prompt.
2. Use the Shortcut.exe tool to disable automatic network shortcut resolution
with this shortcut. To do so, type the following line at the command prompt,
and then press ENTER
" shortcut.exe -s " (without the quotation
marks)
where is the path to the shortcut you want to change, and
is the name of the shortcut from which you want to
remove the UNC path information.
3. Click Start, point to Programs, click Windows NT Explorer or Windows
Explorer, and then locate the shortcut you specified in step 2.
4. Rename the shortcut. When you rename the shortcut, Windows updates the
shortcut so that it does not perform automatic network shortcut resolution.
Do not change the extension of the shortcut.
For information about how to rename a file, click Start, click Help, click the
Index tab, type "renaming" (without the quotation marks), and then
double-click the "Renaming files" topic.
NOTE: You must rename the shortcut file in Windows NT Explorer or Windows
Explorer. The shortcut is not updated if you rename it at a command prompt.
5. Use the Shortcut.exe tool to resolve the shortcut to a static location and
the delete the UNC path information. To do so, type the following line at a
command prompt and then press ENTER
" shortcut.exe -r \ " (without the quotation
marks)
where is the path to the shortcut you want to change, and
is the name of the shortcut from which you want to
remove the UNC information.
For additional information, please see the following articles in the Microsoft
Knowledge Base:
Q134401 Windows 95 Resource Kit Readme.txt File
Q137725 Resource Kit Tools Included on the Windows 95 CD-ROM
The same result can be applied globally to all shortcuts by installing the
following updated file for Windows 95, or a later version of this file:
SHELL32.DLL version 4.00.952 dated 11/3/95 817,664 bytes
STATUS
======
This behavior is by design. An update for Windows 95 to change this behavior is
now available, but is not fully regression tested and should be applied only to
computers experiencing this specific problem. Unless you are severely impacted
by this specific problem, Microsoft does not recommend implementing this update
at this time. Contact Microsoft Technical Support for additional information
about the availability of this update.
This updated functionality is also included in Microsoft Windows 98.
MORE INFORMATION
================
Automatic resolution may be undesirable if the file pointed to by the shortcut
has been deliberately moved to a different resource, or if a load- balancing
mechanism is in place so that the same drive letter may be mapped to one of
several network resources with identical contents.
When you right-click a shortcut, click Properties, and then click the Shortcut
tab, the Target box specifies the path to the file and can contain either a UNC
path (\\server\share\directory\filename.ext), or a static path
(\directory\filename.ext).
A shortcut to a network resource may have either type of path as the target
depending on how it was created. For example, if the shortcut was created by
right-clicking a network file and clicking Create Shortcut, it contains a static
path and a UNC path.
When you run Shortcut.exe with the -s parameter to disable automatic network
shortcut resolution, depending on the type of shortcut and the status of any
network drive mappings, the following results occur when you double-click the
shortcut:
Shortcut Containing UNC Path Only
---------------------------------
Disabling automatic shortcut resolution in a local shortcut, or one containing
only UNC information, has no effect on the manner in which the shortcut is
resolved.
Shortcut Containing UNC and Static Paths
----------------------------------------
For a shortcut that contains both UNC and static paths, shortcut resolution is
more complex. If the you have not disabled shortcut resolution, then the
original network resource is used. If the shortcut is mapped to the drive
specified in the static path, that drive is used. If the resource is mapped to a
different drive, the new drive is used, and the shortcut's static path is
updated with the new drive information. If the resource is not currently mapped
to a drive, one is assigned automatically, and the shortcut is updated with the
new drive information.
If shortcut resolution has been disabled, it is resolved to the specified static
path. Note that the original UNC path information is still contained within the
shortcut.
If the original network share is mapped to the drive specified in the static
path, the shortcut is resolved to it, but the UNC path information is not
deleted from the shortcut.
If a different network share has been mapped to the drive indicated by the static
path, and the static path points to an existing file on that drive, then the UNC
information is removed from the shortcut, and the shortcut is resolved like a
local shortcut. The update to Shell32.dll causes UNC information in all
shortcuts to be ignored if the DWORD value "LinkResolveIgnoreLinkInfo" is
present in the following registry key, and set to a data value of "1":
HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
If this registry value is not present, this update will function the same as the
released Windows 95 version in this respect. This registry value is not added
automatically when installing this update.
For additional information about issues resolved by updates to this component,
please see the following articles in the Microsoft Knowledge Base:
Q161100 File May Be Truncated When Copied to a Full Network Drive
Q138014 File May Be Truncated to Zero Bytes When Copied Onto Itself
Q136834 Error Copying Read-Only Files to Core SMB Server
Q160807 Cannot Connect to Windows NT Server with Many Shares
For additional information about Windows 95 updates, please see the following
article in the Microsoft Knowledge Base:
Q161020 Implementing Windows 95 Updates
Additional query words: winnt prodnt
======================================================================
Keywords : kbnetwork kbpolicy kbui win95
Version : 4.00 95
Platform : WINDOWS
=============================================================================
Copyright Microsoft Corporation 1999.
(c)2000 Dipl.-Inform. Thomas Fakler - zuletzt geändert 20.12.2000